Home>Dental>Dental Tools>4:1, 16:1,10:1 Low Noise & Vibration Dental Surgery Reduction Contra Angle 1 4:1. 16:1. 64:1 reduction contra angle for surgery
Available on backorder
4:1, 16:1,10:1 Low Noise & Vibration Dental Surgery Reduction Contra Angle 1 4:1. 16:1. 64:1 reduction contra angle for surgery
Features:
1.Develop dental film in daylight. no darkroom needed.
2. Small size,light in weight
3.Time is adjustable, high contrast of
picture imaging in focus.
4. Can be used with sensor.
5. Radiation volume is comply with international standard(IEC601-1-3.1993)
Features:
2pcs PANAMAX High Speed & 1 set of EX-203C Low Speed handpiece.
OEM and ODM service are avalible.
Low Speed Handpiece(Contra Angle+straight Handpiece+Air Motor):
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135°C Autoclavable, suitable for both steam and chemical autoclave
Air Motor EX-203C:
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- Borden 2 Hole / Midwest 4 Hole
- Max speed 20,000 min-1
Contra angle handpiece:
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors
Straight Nosecone:
- Working pressure: 0.3MPa
- 0.25MPa(Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Features:
1. Secure, hand use interproximal stripping.
2. Flexible slice provides comfortable stripping operation.
3. Autoclavable.Double Sided Blade & Single Sided Blade Application:
90 micron - for use as a saw for opening contacts
60 micron - for reduction
40 micron - for contouring
25 micron - for finishing
15 micron - for pre polishing
Reviews
There are no reviews yet.